TTH350 DoorCLICK TO ENLARGE

Details

These wind and impact-resistant doors are designed and tested for use in tornado and hurricane-safe rooms meeting FEMA P361-21 and ICC500-20 standards. It is critical this system be used in conjunction with equivalent performance substrate/wall areas.

DIMENSIONS

  • Top rail: 7″ X 23⁄8″
  • Bottom rail: 81⁄2″ x 23⁄8″
  • Glazing stops: 13/4″ face
  • Medium stile: 5″ x 23⁄8″
  • Mid Rail: 41/2″ x 23⁄8″
  • Door Frame: 31/4″ x 6″

AVAILABLE CONFIGURATIONS

  • Single Min Size 3′ x 7′, Max Size 3’6″ x 8′
  • Pairs Min Size 6′ x 7′,  Max Size 7′ x 8′

REQUIRED HARDWARE

  • Sargent FM8713 Non-Electrified Surface Vertical Rod Exit Device
  • Sargent 351 Surface Door Closer
  • Pemko FMSLF Continuous Gear Hinge
  • Pemko 172A Threshold
  • Pemko 18061 Door Bottom Sweep
  • Rockwood BFLG1050 Latch Guard Cover
  • Sargent HC980 Removable Mullion (pairs)

OPTIONAL HARDWARE

  • Sargent FM8774 Electrified Surface Vertical Rod Exit Device with…
    • 306 Auxiliary Control
    • Electrolynx Harness QC-C1500P Hinge to Power) Electrolynx Harness QC-C012 (Bar to Hinge)
    • Securitron DPS-M-GY Door Position Switch
  • Norton 6061 Auto Operator

FEATURES

  • UL Listed and labeled in accordance with ICC500-20
  • Glazed with 1.286” TOR-GARD 30 glass
  • UL752 Level 3 bullet resistant
  • Anodized or painted finishes
  • Completely fabricated and shipped fully assembled for easy installation
  • Job-specific anchorage requirements provided
  • Designed for conventional installation and glazing methods

TESTING / CERTIFICATION

  • Tested and certified by UL to meet ICC500-20 and FEMA P-361-21 requirements for use in tornado and hurricane-safe rooms and shelters including in the 250mph wind zone. UL Certification #ZHLA.71
  • Tested by UL for bullet resistance meeting UL752 Level 3. Proof of testing can be found at www.ul.com under online listings.

NOTE: In accordance with ICC500-20 minimum and maximum sizes of each door configuration require testing. Please contact Insulgard to ensure job-specific sizes and configurations fall within testing/certification restraints.

CONSTRUCTION

  • Door and frame components constructed from extruded aluminum 6061-T6 alloy temper or equivalent
  • Internal fasteners to be stainless steel type 18-8
  • Interior/Exterior glazing gaskets to be EPDM sponge and wedge
  • All joints and connections will be tight, providing hairline joints and true alignment of adjacent members
  • Anchors to be fully concealed

APPLICATIONS

RESOURCES

INQUIRE ABOUT THIS PRODUCT